设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

SY/T 5980-1999 探井试油测试设计规范

上一篇: SY/T 5969-1994 气测录井资料解释规程
下一篇: SY/T 5970-1995 复杂断块油田开发总体方案设计技术要求

Product Code:SAE J1979
Title:E/E Diagnostic Test Modes
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope:This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.

标准名称：	原产地域产品 文山三七
英文名称：	Product of designatoins of origin or geographical indicatoin?Wenshan sanqi
中标分类：	农业、林业 >> 经济作物 >> 药用植物与产品
ICS分类：	医药卫生技术 >> 制药学 >> 药物
替代情况：	被GB/T 19086-2008代替
发布部门：	中华人民共和国国家质量监督检验检疫总局
发布日期：	2003-04-24
实施日期：	2003-09-01
首发日期：	2003-04-24
作废日期：	2008-11-01
主管部门：	国家标准化管理委员会
归口单位：	全国原产地域产品标准化工作组
起草单位：	云南省文山州三七科学技术研究所、云南省文山州三七特产品、云南省言文山州质量技术监督局、文山三七产业有限公司
起草人：	国家质量监督检验检疫总局
出版社：	中国标准出版社
出版日期：	2004-04-16
页数：	16页
书号：	155066.1-19627

本标准规定了文山三七的原产地域范围、术语和定义、要求、试验方法、检验规则及标志、包装、运输和贮存。
本标准适用于国家质量监督检验检疫行政主管部门根据《原产地域产品保护规定》批准保护的文山三七。

没有内容

没有内容

没有内容

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1